Post your go-fast setup!!! - TennSpeed
Forum Garage




Remember Me?
Go Back   TennSpeed > Automotive Discussions > Technical & Modifications

Reply
 
Thread Tools Display Modes
Old 12-23-2006, 03:19 PM   #1
.BigSexy
Junior Member
 
.BigSexy's Avatar
 
Join Date: Dec 2006
Location: Vegas baby!!
Posts: 68
.BigSexy is on a distinguished road
Send a message via AIM to .BigSexy
Post your go-fast setup!!!
Here is a thread for you to post what you got under the hood. What you plan on doing, and also to write a testimonial about a product you have used...
.BigSexy is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 12-23-2006, 04:07 PM   #2
Techy
Full-Time Post Whore
 
Techy's Avatar
 
Join Date: Dec 2006
Location: Columbia, TN
Posts: 5,603
Techy is on a distinguished road
Under the hood of my beater 96 Civic CX Hatchback is a B16A2 (1.6L DOHC VTEC) from a 99 Civic Si with nothing major done to it. Just an AEM short ram intake, Exedy Stage 1 Racing Clutch and a 7lb Clutchmaster flywheel. I have a cheapo header to put on that my mechanic gave me but it is sitting in the basement right now. The car also has a custom muffler shop pipe with some no name muffler on it. Not too loud and doesn't sound half bad either. That's bout it performance wise on my piece. Nothing special but I like it. Gets me from point A to point B at a decent speed.
__________________
Last night, when I was alone in my room, from out of nowhere... I smelled a fart that wasn't mine.
Techy is offline   Reply With Quote
Old 12-27-2006, 06:48 PM   #3
TigerBallZ
Sunny Side Crew
Member
 
TigerBallZ's Avatar
 
Join Date: Dec 2006
Location: Out Yonder
Posts: 293
TigerBallZ is on a distinguished road
-Stock K20A3 w/base RSX tranny
-Rev Hard turbo kit:Precision T3/T4, cast iron log manifold, 2.5" downpipe, 27"x6.5"x3" intercooler, Tial 38MM wastegate, Greddy Type S bov, MotoTron 650cc 13ohm injectors
-Hondata K-Pro, intake manifold gasket
-R.S. Akimoto velocity stack
-GM solenoid for boost controller via K-Pro boost vs. gear
1st gear @ 6psi, 2nd gear and up 10psi
-Stock cat., Greddy Evo TT 3" catback
-Energy Suspension motor mount inserts, CorSport metal shifter bushings
-Exedy Stg. 2 clutch, 9.5lbs flywheel
-DriveShaft Shop axle
-Autometer Cobalt series A/F, Boost w/carbon fiber mounting cup

-H&R springs 2" drop w/Tokico HP struts
-Ingalls rear camber arm
-Comptech 22mm rear sway bar
-16" Nippon Racing NF-2 full polish wrapped in 225/50 BFG KDW2
-Hawk brake pads

-Honda Factory Performance lip kit and spoiler
-XenonDepot 6500k H.I.D.

-Heavy right foot
TigerBallZ is offline   Reply With Quote
 
Old 12-27-2006, 08:55 PM   #4
ZacCarter
No Tennspeed, No Life
 
ZacCarter's Avatar
 
Join Date: Dec 2006
Location: Knoxville, TN
Posts: 9,719
ZacCarter is on a distinguished road
Send a message via AIM to ZacCarter
Heavy right foot is key.
__________________

AForwardMotion - Motorsports Apparel
Raise your weapon...
ZacCarter is offline   Reply With Quote
Old 12-28-2006, 11:09 AM   #5
b00st
Turbo lag = foreplay.
Junior Member
 
b00st's Avatar
 
Join Date: Dec 2006
Location: Abingdon, VA
Posts: 27
b00st is on a distinguished road
Send a message via AIM to b00st Send a message via MSN to b00st Send a message via Yahoo to b00st
Revo 4bar (stage 2 ecu..boost spikes around 23-25 psi) | Yarrow Sport Rear Stress Bar | B&G Springs and Eibach Struts | Forge Diverter Valve | GHL Cold Air Intake | GHL 3" Turbo-Back Exhaust | 3" GHL Downpipe | 18x8.5 Flik Artic | "Race" N75 valve (boost control) | Euro Switch | Helix Angel Eye Projectors | Smoked Signals and Side Markers | 4bar Fuel Pressure Regulator | 15 mm Spacers (rear) | H&R 28mm Rear Sway Bar | Forge Turbo Inlet Pipe | SW Boost Gauge | EIP Short Shifter and Side-to-Side Reduction kit | Neuspeed Front Sway Bar | Heavy Right Foot

I think that's about it...and I know it's more than just "horsepower mods" but I had this list saved and I'm too lazy to think of everything I've done
b00st is offline   Reply With Quote
Old 12-28-2006, 01:03 PM   #6
Mr.Clean
Junior Member
 
Mr.Clean's Avatar
 
Join Date: Dec 2006
Posts: 57
Mr.Clean is on a distinguished road
Send a message via AIM to Mr.Clean Send a message via MSN to Mr.Clean
im just posting what all it done to my car from my old h-t thread... most of the parts doesnt make me go fast at all I know

95 Acura Integra LS
with JDM Front Conversion with HID's
98 GSR all red taillights
GSR Gauge Cluster
ITR Block
b16 head
b16 Ported Intake Manifold
Apexi N1 Universal Muffler
ARP Head Studs
MSD Spark Plug wires
NGK R Spark Plugs
b16 tranny no grinds as all
chipped p28 ECU from phearable.net
Exedy Clutch
Fidanza 8lb Flywheel
Short Throw Shifter
Greddy Shift Knob
Type R Shift Boot
Carbon Fiber Hood, CF Mirrors, VIS CF Front Lip
Nopi #1 Coilovers
STR Fuel Rail & Regulator
B&M Pressure Gauge
AEM Cam Gears
AEM Powering Steering & Alternator Pulley's
Skunk2 Rear Strut Bar
MOMO steering wheel
JVC CD/MP3/DVD Player
American Pro amp
Rockford Fosgate 12in Punch p2 with RF Box
Skunk2 Lug Nuts
Mr.Clean is offline   Reply With Quote
Old 12-28-2006, 04:41 PM   #7
JDMJoe
Guest
 
Posts: n/a
dont want to give to much away buuut here you go... k-swap, k-pro, weight reduction, well rounded suspension setup, mad jdm ish
  Reply With Quote
Old 12-29-2006, 03:13 AM   #8
redtop240
Father Time
Member
 
redtop240's Avatar
 
Join Date: Dec 2006
Location: 513
Posts: 641
redtop240 is on a distinguished road
Send a message via AIM to redtop240 Send a message via Yahoo to redtop240
Mine is a basic sr swap. (Not complete at the moment)

Redtop sr20det motor, trans, ecu
Invidia 3" exhaust with 3" test pipe
Greddy 3" downpipe
Greddy stainless turbo elbow tapped for exh temp
Cometic metal hg
arp head studs
Exedy hyper single clutch/flywheel
Greddy fmic (from an integra kit) probably going to sell and get a vspl
Greddy hot pipe
J30 vlsd rearend

I still need:

Walboro 255lph fuel pump
Wiring service done
bov
intake
Ignitor chip
Boost controller (because 7 lbs isn't enough and the ecu will handle my greediness)

I won't go into my upgrade plans because that would give it away.
__________________
'91 NA CW
redtop240 is offline   Reply With Quote
Old 12-29-2006, 11:37 AM   #9
sup gurl
wanna screw?
Member
 
sup gurl's Avatar
 
Join Date: Dec 2006
Posts: 456
sup gurl is on a distinguished road
Send a message via AIM to sup gurl
My only go-fast set up is...

2000 Ducati 748

:P
sup gurl is offline   Reply With Quote
Old 12-29-2006, 11:44 AM   #10
redtop240
Father Time
Member
 
redtop240's Avatar
 
Join Date: Dec 2006
Location: 513
Posts: 641
redtop240 is on a distinguished road
Send a message via AIM to redtop240 Send a message via Yahoo to redtop240
Quote:
Originally Posted by sup gurl
My only go-fast set up is...

2000 Ducati 748

:P
You win. :!:
redtop240 is offline   Reply With Quote
Old 12-29-2006, 09:27 PM   #11
John M
Guest
 
Posts: n/a
my go fast setup is um my ufffffffff SPHHHOOOOOOONNN CAMZZZZZZZZZZZZ YO
  Reply With Quote
Old 12-30-2006, 05:26 AM   #12
redtop240
Father Time
Member
 
redtop240's Avatar
 
Join Date: Dec 2006
Location: 513
Posts: 641
redtop240 is on a distinguished road
Send a message via AIM to redtop240 Send a message via Yahoo to redtop240
Quote:
Originally Posted by John M
my go fast setup is um my ufffffffff SPHHHOOOOOOONNN CAMZZZZZZZZZZZZ YO
I thought it said go fast? :P
redtop240 is offline   Reply With Quote
Old 01-03-2007, 12:46 AM   #13
h2bpwrdcivic
 
Join Date: Dec 2006
Posts: 2
h2bpwrdcivic is on a distinguished road
Quote:
Originally Posted by John M
my go fast setup is um my ufffffffff SPHHHOOOOOOONNN CAMZZZZZZZZZZZZ YO
is that some street knock offs for spoon cams?
h2bpwrdcivic is offline   Reply With Quote
Old 01-03-2007, 04:09 AM   #14
Techy
Full-Time Post Whore
 
Techy's Avatar
 
Join Date: Dec 2006
Location: Columbia, TN
Posts: 5,603
Techy is on a distinguished road
you wanna know the kickass go-fast set-up my brother created on my last car was? I didn't do a damn thing to this car cause I had no money to. My brother put all this crap on. For 2 years I drove it like this before wrecking.

1995 Honda Civic EX Coupe (EJ1)

D16Z6, totally stock, even the clutch and flywheel except for:
APC Short Ram
APC Muffler
APC Strut bar
Some kinda coil-overs. Hell if I know what they actually were.
When it was his:
17" Enkei wheels (I think RS-E's but I'm not sure) on some wore out Kumho Ecsta Supra's
When it was mine:
Stock 14" Steelies with covers on some cheap ass, bald ass, Regal Sport Challenger tires (or Challenger Regal Sport, not really sure)
then
15x6" 1997 Acura Integra GS-R Mesh wheels with nice BF Goodrich Traction T/A tires (currently on my hatchback)

wow my brother was a ricer.

Don't get me wrong. I loved that car and I wish I still had it. I just wish I had it with my hatch's setup instead. Thank God my brother now knows that all that crap was worthless. He's helping me with my current bucket and it's nothing but quality parts now.
Techy is offline   Reply With Quote
Old 01-04-2007, 09:35 PM   #15
Thompson
Whatever
 
Thompson's Avatar
 
Join Date: Jan 2007
Location: Service Bay
Posts: 21
Thompson is on a distinguished road
My 90
My current setup is:
1990 240sx
1994 SR20DET Blacktop (Painted red)
Freddy intake manifold
DC Sports turbo manifold
Garrett GT28RS .64
Tomei cam gears
HKS 264 cams degreeded by mr munson
Precision 880cc injectors
Koyo radiator
Blitz FMIC
Eagle H-Beam rods
CP pistons
Greddy rocker stoppers
Greddy head gasket 1.2mm
Ogura twin plate clutch
3" downpipe w/SideExit
Mr. Munson chipped and tuned ECU
5 Lug conversion
Z32 brakes
Z32 Maf
OE VLSD

Making 400whp
12:20 / 118 @ Bristol
Thompson is offline   Reply With Quote
Old 01-05-2007, 11:59 AM   #16
redtop240
Father Time
Member
 
redtop240's Avatar
 
Join Date: Dec 2006
Location: 513
Posts: 641
redtop240 is on a distinguished road
Send a message via AIM to redtop240 Send a message via Yahoo to redtop240
Thats pretty sweet.
redtop240 is offline   Reply With Quote
Old 01-09-2007, 12:42 AM   #17
cerealkiller93
Guest
 
Posts: n/a
i'm about to put this:


in this:


any questions?


but as for right now my "go fast" setup is a stock 325e with a flowmaster exhaust.. w00t w00t. which is the above pictured car.
  Reply With Quote
Old 01-09-2007, 05:15 PM   #18
mikenacarato
NOM NOM NOM
 
Join Date: Dec 2006
Location: Franklin, TN
Posts: 18
mikenacarato is on a distinguished road
currently i have:

14T (euro S40 turbo +30hp @7.5psi) running at 15psi
short ram intake with heat shield
3" turbo back exhaust
UPSolute ecu tuning
ngk plugs with magnecor 8.5mm wires wrapped in heat wrap
custom intercooler to throttle body hardpipe wrapped in heat wrap
hks ssqv bov
custom turbo to intercooler hardpipe
optima red top
turboxs hpmbc

and next weekend goes on the Volvo Motorsports GT28 kit
that includes a Garrett GT2871R turbo with a custom exhaust manifold and new lines and everything
walbro 255lph fuel pump and rc 450cc injectors
__________________
Mike Nacarato
-Track.One-
[email protected]
mikenacarato is offline   Reply With Quote
Old 01-09-2007, 05:37 PM   #19
00Accord4cyl
Senior Member
 
Join Date: Jan 2007
Posts: 1,029
00Accord4cyl is on a distinguished road
Send a message via AIM to 00Accord4cyl
Mine

Removed intake resonator...
+Apexi WS exhaust


=Slow
00Accord4cyl is offline   Reply With Quote
Old 01-10-2007, 02:11 PM   #20
b18cDA
 
Join Date: Jan 2007
Posts: 16
b18cDA is on a distinguished road
crappy da integra with a jdm gsr swap and other goodies
__________________
c-town representing
b18cDA is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:33 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2021, vBulletin Solutions, Inc.