[ASHLEYS99CIVICEX]

i am throwing the codes

0113
0141
0753
0758

wondering if anyone could help me out and tell me what they are, thanks ever so much, Ash.

 

[CARMandP-NWH]

P0113---intake air temp sensor high input--probably unplugged the intake air temp sensor on the side of the intake manifold with the key on. Possible bad sensor as well.

P0141--o2 sensor #2 (rear sensor) heater failure. I have replaced numerous of the rear sensors for this code. Replace the rear o2 sensor in the back of the cat converter.

P0753--Shift control solenoid valve "A"
P0758--shift control solenoid valve "B" Both a little harder to diagnose. Possible transmission problem or solenoids unplugged with key on?

 

[ASHLEYS99CIVICEX]

P0113---intake air temp sensor high input--probably unplugged the intake air temp sensor on the side of the intake manifold with the key on. Possible bad sensor as well.

P0141--o2 sensor #2 (rear sensor) heater failure. I have replaced numerous of the rear sensors for this code. Replace the rear o2 sensor in the back of the cat converter.

P0753--Shift control solenoid valve "A"
P0758--shift control solenoid valve "B" Both a little harder to diagnose. Possible transmission problem or solenoids unplugged with key on?

okay my plug in to hook the computer up is behid the ash tray and the shifter is right in front of it so I had to knock in down in 1st gear to be able to pull out the ash tray and let the guy hook the plug in. but also despite of all that I just replaced the tranny yesterday we put another one in and it still wont pull like it should, I'm kinda in a hurry to get everything
out so I won't be stuck without a way to work tomorrow. Btw I have another parts car here that I can swap shit out. just the axels are messed up and windshield is busted.
so what or where should I start?...