Tennessee Car Forums at TennSpeed banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,957 Posts
Just wet snd them with 1200 and then 2000 grit with plenty of water. Get them as dull and as smooth as possible. Then you need a nice buffer and some good 3m compound. Go slow and take your time. After a few passes with the buffer they should look really nice. Depending on if the lights have tiny cracks and if any of the discoloring is on the inside of the lens.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top