[aye bee]

so i read that if you run low impedance injectors you have to wire in a resistor box from a DSM to work.. will you still have to do this if the car is tuned? also, will any other resistor work, like obd0/1 hondas?

any help is appreciated.

 

[4x4le]

yes, even with a tune you need to do the resistors. It makes them communicate with the ecu properly. I dont know about the dsm box though, it probably works but you can get the dropping resisters for a few bucks from some places. JGY comes to mind even though I dont care for them personally, ordering a part like that would be no big deal. Also summit.

 

[noturs14]

^^ he ^^ knows his shit man! trust him

 

[S14 James]

yes, even with a tune you need to do the resistors. It makes them communicate with the ecu properly. I dont know about the dsm box though, it probably works but you can get the dropping resisters for a few bucks from some places. JGY comes to mind even though I dont care for them personally, ordering a part like that would be no big deal. Also summit.

If you have a voltmeter most of them have a resistance measurement function. I'm pretty sure you can use the honda box... as your trying to drop the voltage down from 12V to something like 5V
-James

 

[85rx-7gsl-se]

Might be able to use 86-87 FC RX-7 box as well

 

[aye bee]

alright guys!
thanks alot!

 

[spoolie]

yes...the cheapest box is off a obd0 honda... even with AEM you still use a resistor box.
i picked up my box from pull-a-part for 2 dollars.

 

[aye bee]

yes...the cheapest box is off a obd0 honda... even with AEM you still use a resistor box.
i picked up my box from pull-a-part for 2 dollars.

yeah and there are tons of those out there.

thanks for input!