wtt 95 semi built boosted b16 coupe/for rhd civic only

1486 Views 16 Replies 12 Participants Last post by BigCountry, Dec 15, 2008

jdmb16turbo

Discussion Starter · Dec 11, 2008 (Edited)

11

ok im wantin to trade my car for a clean rhd civic doesnt matter which motor is in it as long as it is clean.but i would prefer it to have a b series in it.the turbo is not on the car yet buy should be friday morning or tomorrow night.the engine has 65k on it doesnt smoke or leak any oil.im located in athens tennessee car hasnt had any wrecks clean title in hand

.interior conditon is a 9/10
.simpson racing seatbelts
.99 civic front seats
.white rota slips

.engine jdm b16
.3 angle valve job
.after market valves and retainers
.new timing belt
.all new seals
.gsr trans only bad thing is that it has a slight grind going into 3rd at high rpms
.
. jdm7mm plug wires
.walbro 255 fuel pump
.after market aebs intake mani(not on yet)
.75 mm edelbrock throttle body(not on yet)

.turbo kit includes
.tial sport external wastegate
.drag log mani
.3 inch down pipe
.hks knock off bov
.brand new intercooler and piping
.oil line
.450 injectors
chipped p72 ecu on crome
.baby turbo timer
im sure im missing alot but for more pictures just give me a pm i will have better pictures tonight when the rain/snow goes away its in my garage and cant take good pics in it

See less See more

1 - 17 of 17 Posts

jdmb16turbo

Discussion Starter · #2 · Dec 11, 2008

piping and intercooler is already on the car

undr_boost

· #3 · Dec 11, 2008

clean car, but I dont think anyone will trade their RHD civic for a non-built bottom end boosted car without a tuning management device and which the car isnt even running on boost yet, never know how it would respond to it.

not ragging on ya at all bro, but just my honest opinion.
Beautiful car and Good luck with sale.

jdmb16turbo

Discussion Starter · #4 · Dec 11, 2008

undr_boost said:
clean car, but I dont think anyone will trade their RHD civic for a non-built bottom end boosted car without a tuning management device and which the car isnt even running on boost yet, never know how it would respond to it.

not ragging on ya at all bro, but just my honest opinion.
Beautiful car and Good luck with sale.

my computer is already tuned off of my other b16 coupe its almost the same set up besides the head work on this one and all the turbo stuff is name brand except the knock hks bov.crome is ok im not really a big fan but it gets the job done if you dont have the money to blow 600 on hondata

LiveLife2ItsFullest

· #5 · Dec 11, 2008

still i dont see someone trading there clean bseries RHD civic for boosted civic but good luck

team9

· #6 · Dec 11, 2008

good luck bro, i've been tryin to trade my built gsr hatch with a full greddy turbo kit with hondata and alot more mods for a 4dr civic with a b-series swap. i dont think anyone wants turbo car anymore

two4x4s

· #7 · Dec 11, 2008

what paint did you use for that valve cover? Clean coupe btw

got_boost?

· #8 · Dec 11, 2008

clean ride man

spoolie

· #9 · Dec 11, 2008

in after i locked it...

read the marketplace rules...and take some normal pictures...
no not about the 100 posts either...

jdmb16turbo

Discussion Starter · #10 · Dec 11, 2008

thnaks spoolie i ll have more pictures and update this afternoon sometime

CMONEY12

· #11 · Dec 11, 2008

honda

--------------------------------------------------------------------------------
--------------------------------------------------------------------------------

I'm selling my 94 hatch. I hate to, but I have to. I started to build the car for autocross, but I don't have the money or the time to finish it. The car runs great, and it's far from stock. I have no idea how many miles are on the motor or the car itself so please don't ask. This car is built for someone who is looking for a toy.

The paint is a Porsche Forrest Green, and the engine bay and door jams are painted to match. I put a JDM B18B in the car. I bought it from Honda Motors Online. Their motors have about 20-25k miles on them. Plus I changed out the gauge cluster on the car so I could have a tach. But It needs a new cluster because the fuel gauge does not work. Here is a list of mods on the car...

Visteon Radiator, All aluminum. No power steering or A/C. Exedy Clutch and 12lb flywheel. 2000 GSR Tranny. New plugs, wires, cap and rotor. New fuel filter, fuel sending unit, and fuel pump (255 lph Walbro). Blox intake manifold. OEM JDM Type R header, Omni power test pipe, and Apexi World Sport 2 cat back exhaust. I have some random fake carbon fiber short ram intake on the car. I have a cold air intake pipe for it, but just not filter. The car has a cheap carbon fiber hood on it and a fiber glass duck bill wing. New windshield, but no molding around the windshield. I have new headlights, along with new amber corner lights with OEM JDM tail lights. All of the ball joints and bushings are good on the car. There is a B&M short shifter with the one pound Skunk2 knob in the car. I have Skunk2 lower control arms in the rear, Omni camber kit all the way around along with Omni Power Sport coil overs. (Handles like crazy, but rides rough as hell.) There is a Tenzo R steering wheel in the car for now, and I have Del Sol seats in the car. I also have installed a Blox FPR and Apexi timer. Air fuel ratio and fuel pressure guages.

There are a few more little things done to the car, but that is all the major stuff. Every time I had to replace anything, I always ordered it from Honda. So everything that is on the car that is OEM, is from Honda. The car is on black steelies for now, but for an extra 1000 dollars, I will throw in my wheels and strut bars. Roto Slip streams wrapped around Neo-gen tires and I have the three point Password JDM strut bar in front, Four point strut bar in the back and the trunk brace as well. I have posted before, but no one ever had the money, please, serious offers only please.

MY NAME IS PUGG. MY NUMBER IS 901-503-2618.

See less See more

jdmb16turbo

Discussion Starter · #12 · Dec 12, 2008

hey

spoolie said:
in after i locked it...

read the marketplace rules...and take some normal pictures...
no not about the 100 posts either...

updated more added

nismojunkie

· #13 · Dec 12, 2008

never gonna happen haha

ParkerDA9mm

· #14 · Dec 14, 2008

don't make a deal with this guy. he's a bullshitter.
told me his blades were in excellent condition but one had a "slight bend but you would never know driving down the road" and after i drove 2.5 hours to pick them up they looked alright and i got them and left. i felt some vibration and i just got it tested yesterday and it's bent all to hell. you can only tell if it's rolling. and with the "mint slips with brand new tires" he threw in one tire had a nail hole in it and that same wheel was bent. just a heads up his car's probably about to blow up and he wants to dump it off on somebody that is going to trust him. don't fall for the same thing i did, and don't trust him. [/rant]

jdmb16turbo

Discussion Starter · #15 · Dec 15, 2008

dude your full of shit.i told this dude to check out the wheels before anything and he was like yeah i want them.but im not trading my car we turboed it this weekend and to everyone that seen my thread about the blades i said that one of them had a little bend in it.and his was the same way it had a bend i can post up pics

GivNoFuck

· #16 · Dec 15, 2008

gl with the trade but its not going to happen bro but free bump

BigCountry

· #17 · Dec 15, 2008

jdmb16turbo said:
dude your full of shit.i told this dude to check out the wheels before anything and he was like yeah i want them.but im not trading my car we turboed it this weekend and to everyone that seen my thread about the blades i said that one of them had a little bend in it.and his was the same way it had a bend i can post up pics

See less See more

1 - 17 of 17 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.